More Dachshund Bags

Well my 2 Green Dachshund Bags are winging their way to their new home in New York

L1003705

 …………………….. so of course I had to make another one!  For this one I used bright summer colours.  I wet felted the bag from 2 layers of Perendale and 2 layers of Merino wool batting.  Then I shaped it, dried it and hand stitched a braided leather handle (bronze) all the way around.  I wanted a big, bold front, hence the Dachshund on the move, a bright yellow sunflower, some tiny white Aubretia and a leaf.  I needle felted these …………………. it took forever – the sunflower was particularly time consuming as each petal was done individually.  I added the white heart to balance it and then turned it over.

L1003720

On the other side I needle felted a dachshund holding colourful balloons, again all needle felted individually.  Along the bottom I needle felted more flowers blue, pink, white and purple – completing my colourful, summery bag!

L1003722

 

More Dachshund Bags

The Mad March Hare

blog-15

A friend asked me how I made this hare………………….. it is kind of hard to explain so I took pictures as I went along – hopefully this will explain how I made him!  I used lots of pictures of hares to help me and I found his head particularly hard to do – I made the head 3 times before I attached it (finally)

First of all I got my wool and needles ready – I added extra wool colours later – grey, black and 2 different browns.  I got an assortment of needles out – larger ones for rough felting the shape and finer ones for the detail – some inbetween ones for bits like the ears.

blog1

blog-2

He started life as an onlong shaped piece of wool batting from the second bag from the right and I started to needle the piece until I saw the shape I wanted emerging

blog-3

Next I felted his 2 back legs from 2 more clumps of batting.  I rolled them into shape, bent them at the foot and knee joints and felted them for a long time to make them keep their shape – just wool, no wire or armature – then I dressed the legs and feet in their first coat of top wool and started to needle in the first coat on his back

blog-4

blog5

I then made the tail and started mixing the colours for his thick, back coat and added the white hairs that go up his sides

blog-6

Next for the front legs.  These are long and straight so I used fine chenile sticks (pipe cleaners) to wind the wool round before I felted it.  I then attached them to the body, felting them in hard so they do not come loose.

blog-7

Next for the head and this was really difficult to get the right shape and to felt it onto the body at the correct angle.

blog-8

blog-9

blog-10

I did not felt his head too firmly yet as I needed to add the eyes – to do this I made holes with a bradawl, and glued the eyes in place.

blog-12

blog-11

Adding the colour and texture to his face took forever – white around the eyes to define them, then a fleshy nose, different shades of brown, grey and black to match the contours of the face and of course, some whiskers to stitch in.  I stitched these in with a long doll needle so that they cannot pull out easily – I secured them each with a dab of glue.

blog-13

blog-14

I carried on felting over to make sure his top coat had the right mix of colours in and then I made the ears (forgot to take pics of this as I was so engrossed!)  Then I felted them on to the top of his head, leaning backwards slightly, edged with white hair and with the classic black stripe and tips.

Finally, he was done!!!  I hope you like him and enjoyed my guided journey to his completion.

blog-15

The Mad March Hare

Making The Miniature Pinscher

Well ….. the wind is howling and the rain is lashing down.  The dogs were all asleep so I started needle felting a Miniature Pinscher.  Not an easy task when it is only going to be small …. 11cms (4 and a half inches) long and the same high.  So I got out the wool and a range of needles – thicker ones for the body felting and finer ones for the legs and face.

min-pin-1

 Usually, I make the body first but as the legs are quite fiddly, I did the front legs first, using fine chenile sticks to felt the wool round, making sure the outsides were black and the inside of the legs red (as observed via Googling lots of Miniature Pinscher pictures!!)

min-pin-2

Once the legs were eventually felted, I made the body from black roving and felted the legs on.  To make sure they are secure, I stitched through them and the body with a long doll needle and black thread, then used black wool to felt over the stitiching.  The body needed quite a lot of felting as the tummy tucks up and the dog actually looks like a wedge shape in real life so I had to slope the back down and the tummy up.  I then felted over the black chest with a band of red brown roving with a fine black line down the centre.  I left the neck mostly unfelted because it needed the head making and attaching.

min-pin-3

min-pin-4

Next for the tail, which was felted around a small piece of a fine chenile stick so that I could bend it appropriately.  The under side of the tail is the red brown, the same  as the inside of the legs and the chest.

min-pin-5

I felted the tail on, making sure it was firmly attached and bent at the right angle.

Next for the head.  I rough felted the shape which was incredibly complicated because the breed has a full face, finer muzzle and eyes that are sort of facing forwards.  I messed and messed with this – starting over at least 3 times!

min-pin-5b

Finally, I added the eyes – small black beads on wire, which are glued into the head after making a hole in the felt with a Bradawl.  I then felted around them with a fine line of cream batting to give the impression of eyelids, which are slanting upwards from the corners.  Next I added the red brown colour to the face and under the chin, glued on the polymer clay nose and felted a fine black mouth line underneath.  I felted a flat piece of black and overlaid it with a fine layer of pink, which I used to cut the ears from, attaching them so they stood high and pointed on the back of the top of the head.  A little more felting and a bit more wool added to give the neck the correct width and strength and he was finally finished.

He took about 5 and a half hours to complete.

min-pin-8

min-pin-7

Prior to making him I made a pretty Chinese Crested, using the same methods as above

_dsc7600

Making The Miniature Pinscher

The Innocent Slumber of the Needle Felted Wire Haired Dachshund

Ah the satisfaction of completing my little replica.  I watched our little mini wire Aldo sleeping and thought – that would be good to needle felt – so my needle came out and I started.

The base was pink – really harsh wool that enabled me to get the shape easily.  I made the legs and head separately and before I attached them I covered his tummy in brown Shetland combed top.   I then dressed the legs with a mix of Icelandic and Shetland top – cut into tiny pieces that I hand mixed to get the wild boar look of the coat.  I left the tops of the legs un-felted so I could attach them to the body and I used a long doll needle to stitch through the front legs so they stayed in the right position whilst I felted them on.  I then attached the head – still in its un-dressed state and looking really odd – the pink made it look like an alien!  It took a while to cover the body in its mixed wool coat and once done I added the tail and started on the head – that was very fiddly – adding eyebrows and a beard, felting on the black nose and doing a fine line for the closed eyelids.

When I was happy that he was in the correct sleeping position and his beard was well needled in, I put him aside and made the basket from Green Perendale batting.  The banket came next, a small piece of doubled Sherpa fleece (that I use for my real dog beds)  I embroidered a small paw print on one corner and overlocked it. 

I finally had my mini miniature – 5 inches long in a basket 6 inches wide!

l1003591

l1003590

l1003589nic

The Innocent Slumber of the Needle Felted Wire Haired Dachshund

A Dachshund and Mouse Tale …..

_dsc7569

Well, the needle felting bug has really got me.  I have been busy making  wire haired dachshunds and decided I was fed up with them “posing” so I wanted a bit more “action”.  Hence I made a little needle felted mouse with a dachshund crouching ready to pounce, eyes shining, tongue out ……..

The mouse is felted from Shetland wool with brown merino ears.  Its little black eyes are plastic beads on wire and its nose is black Icelandic sheep wool.

The dachshund was tricky as he needed a sloping back, crouching forward, open mouth and tongue protruding.  If you look very closely you will see he also has little white teeth felted into his bottom jaw.  I made his bottom jaw and tongue separately, needle felting the teeth and tongue into the black Icelandic wool, then attached it the rest of his face.  His neck needed to be a bit longer than usual because he is stretching to reach the mouse, his front legs are drawn back a bit under his body and his back legs are straight to provide the propulsion he needs to pounce ……

_dsc7555

_dsc7569

_dsc7567

_dsc7564

_dsc7560

_dsc7558

_dsc7567

A Dachshund and Mouse Tale …..

More Dachshund Needle Felting

Well the long winter days have to be filled so I carried on felting ……….. in-between sewing, making leads, quilting, making trolley covers and embroidering!  So – here they are:

_dsc7512

The pink one featured in my previous post.  The next one I did was the green one, with his coat and hat on.  I rough felted some polyester toy filling to get his shape.  I then covered it in Perendale batting.  I used Merino for his eyes and nose and was itching to try and felt over to make him a coat and hat.  I worried about that as I did not want to ruin him but once started, there was no going back so I ploughed on and was pleased with him in the end!

_dsc7514

Next I wanted to sculpt the “sitting pretty” dachshund.  That was a challenge!  Getting the back legs to look right (and look the same) was tricky but nowhere near as difficult as the front paws and the head leaning to one side!  He is made completely of Perendale wool which felts well and leaves a fairly smooth finish.  I added a colourful scarf to give the whole figure a bit of fun!

_dsc7513

Now I had done a few I wanted to try my hand at a little “wirey” person.  I bought some wool roving in different colours and mixed it a few strands at a time in short pieces to give the “wild boar” look to the coat.  It was painstakingly slow but to do it any other way would have looked “stripey” so it was a case of plodding on …………….  I covered him all over in a brown undercoat and felted the top wire in 10cm strips ……. lots of coffee was consumed during this part!   With the finished shape completed I enjoyed adding his eyes, beard and eyebrows and am pleased with the finished piece.  Am hooked and will be starting another one soon!!!

_dsc7530

_dsc7520

 

 

_dsc7535

_dsc7524

_dsc7528

_dsc7532

_dsc7534

_dsc7526

_dsc7536

He is tired of posing now!!!

 

More Dachshund Needle Felting